Durlon® Virgin PTFE

Durlon® Virgin PTFE gasket material is a high-performance PTFE product designed for use in piping and equipment in chemical and other general industrial applications where resistance to highly aggressive chemicals (including hydrofluoric acid) is required.

Industries

, ,

Category:
Durlon®Virgin PTFE is made with only pure PTFE resins. It has excellent sealability characteristics, cuts easily, and separates cleanly from flanges after use. Durlon® Virgin PTFE demonstrates high dielectric strength.
Durlon® Virgin PTFE sheet gasket material is available in two grades: Skived; has better physical properties, good electrical insulator and FDA approved and Reprocessed; recycled PTFE processed into skived or molded sheet
Skived
Color White
Material Skived
Temp. Min.
Temp. Max.
-212°C (-350°F)
260°C (500°F)
Pressure, max, bar (psi) 86 (1,250)
Density, g/cc (lbs/ft3) 2.1 (135)
Compressibility, % 12-20
Recovery, % 35-40
Creep Relaxation, % 40
Tensile Strength, MPa (psi) 2,800 (19.3)
Sealability
ASTM 2378 (Nitrogen)
0.01 cc/min
Reprocessed
Color White
Material Reprocessed
Temp. Min.
Temp. Max.
-212°C (-350°F)
260°C (500°F)
Pressure, max, bar (psi) 86 (1,250)
Density, g/cc (lbs/ft3) 2.1 (135)
Compressibility, % 18-25
Recovery, % 30-35
Creep Relaxation, % 50
Tensile Strength, MPa (psi) 1,500 (10.3)
Sealability
ASTM 2378 (Nitrogen)
0.015 cc/min

Note: ASTM properties based on 1/16″ sheet thickness except ASTM F38, which is based on 1/32″ sheet thickness. This is a general guide only and should not be the sole means of accepting or rejecting this material. The data listed here falls within the normal range of product properties but should not be used to establish specification limits nor used alone as the basis of design.

*For applications above Class 300, consult your representative.

FDA Conforms to the requirements of 21 CFR 177.1550 for food and drug contact (Applies to Skived grade only)
RoHS Reach Declaration Compliant