Durlon® 9002

Durlon® 9002 is an adaptation of the original glass-filled formula to better meet extreme cryogenic demands. Durlon® 9002 has passed both gaseous and liquid oxygen tests up to 260°C (500°F) at 52 bar (754 psi) using BAM standards and LOX Mechanical Impact Sensitivity (ASTM G86 & ISO 21010), passing with zero reactions out of twenty tests (0/20) at a test reaction frequency of 0%.

Industries

, ,

Category:

Durlon® 9002 is an adaptation of the original glass-filled formula to better meet extreme cryogenic system demands. Durlon® 9002 has passed both gaseous, [up to 260°C (500°F) and 52 bar (754 psi)] and liquid oxygen tests performed by BAM Federal Institute for Materials Research and Testing. Durlon® 9002 has also been tested for LOX Mechanical Impact Sensitivity, passing with zero reactions out of twenty tests (0/20) at a test reaction frequency of 0%.

Durlon® 9002 is readily available through the standard manufacturing process and requires no secondary heat or cleansing treatments prior to gasket cutting. Once gaskets are cut, traditional oxygen cleaning standards must be applied for safety. Durlon® 9002 comes available as oxygen cleaned gaskets, bagged, labeled, and sealed according to the European Industrial Gases Association standard for Cleaning of Equipment for Oxygen Service.

Durlon® 9002 is readily available through the standard manufacturing process and requires no secondary heat or cleansing treatments prior to gasket cutting. Once gaskets are cut, traditional oxygen cleaning standards must be applied for safety. Durlon® 9002 comes available as oxygen cleaned gaskets, bagged, labeled, and sealed according to the European Industrial Gases Association standard for Cleaning of Equipment for Oxygen Service.

Durlon® 9002 is made with Teflon™ fluoroplastic. Teflon™ is a trademark of The Chemours Company FC, LLC used under license by Triangle Fluid Controls Ltd.

Color Blue
Filler System Inorganic
Temp. Min.
Temp. Max.
Continuous, Max
-212°C (-350°F)
271°C (520°F)
260°C (500°F)
Pressure, max, bar (psi) 103 (1,500)
Density, g/cc (lbs/ft3) 2.2 (138)
Compressibility, % 8-16
Recovery, % 40
Creep Relaxation, % 30
Tensile Strength, MPa (psi) 13.8 (2,000)
Sealability
ASTM 2378 (Nitrogen)
0.01 cc/min
Volume Resistivity, ohm-cm ASTM D257 1.0 x 105
Dielectric Breakdown, ASTM D149, kV/mm (V/mil) 16 (406)

Note: ASTM properties based on 1/16″ sheet thickness except ASTM F38, which is based on 1/32″ sheet thickness. This is a general guide only and should not be the sole means of accepting or rejecting this material. The data listed here falls within the normal range of product properties but should not be used to establish specification limits nor used alone as the basis of design.

*For applications above Class 300, consult your representative.

FDA Conforms to the requirements of 21 CFR 177.1550 for food and drug contact
BAM oxygen service: gaseous & liquid Up to 260°C (500°F) at 52 bar (754 psi)
LOX Mechanical Impact (ASTM G86 & ISO 21010) Zero reactions out of 20 at a test reaction frequency of 0%
RoHS Reach Declaration Compliant
1/16” 1/8”
m 2.2 4.6
Y psi (MPa) 1,937 (13.4) 1,639 (11.3)
Gb psi (MPa) 639 (4.4) 495 (3.4)
a 0.220 0.262
Gs psi (MPa) 55 (0.379) 65 (0.448)