Durlon® 8600

Durlon® 8600 is a quality compressed sheet gasket material for use in process industries including pulp & paper, power, petrochemical as well as general industry where a “white” gasket material is often required when working with food & beverage, pharmaceutical and plastics. Applications: water, steam, air, inert gases, alcohols, dilute acids and alkalis.

Industries

, , , ,

Category:
A quality compressed sheet gasket material for use in process industries including pulp and paper, power, petrochemical as well as general industry where a “white” gasket material is often required such as food and beverage, pharmaceutical and plastics. For services such as water, steam, air inert gases, alcohols, dilute acids, alkalis ammonia and many other liquids and gases. Durlon® 8600 exhibits good compressibility and recovery, sealability, flexibility and cutting characteristics. A release agent on both sides ensures good anti-stick properties.
Durlon® 8600 contains high-strength aramid and inorganic fibres bonded with high-grade SBR rubber.
Color White
Fiber System Aramid/Inorganic
Binder SBR
Temp. Min.
Temp. Max.
Continuous, Max		 -73°C (-100°F)
371°C (700°F)
287°C (548°F)
Pressure, max, bar (psi) 103 (1,500)
Density, g/cc (lbs/ft3) 1.7 (106)
Compressibility, % 8-16
Recovery, % 45
Creep Relaxation, % 20
Tensile Strength, MPa (psi) 12.4 (1,800)
Sealability
ASTM 2378 (Nitrogen)		 0.05 cc/min
Fluid Resistance, ASTM F146 IRM 903 Oil 5hrs at 300°F
Thickness Increase, %
Weight Increase, %		 15-30
30
Fluid Resistance, ASTM Fuel B 5hrs at 70°F
Thickness Increase, %
Weight Increase, %		 5-20
30
Flexibility, ASTM F147 8x
Volume Resistivity, ohm-cm ASTM D257 4.2 x 1013
Dielectric Breakdown, ASTM D149, kV/mm (V/mil) 11.7 (297)

Note: ASTM properties based on 1/16″ sheet thickness except ASTM F38, which is based on 1/32″ sheet thickness. This is a general guide only and should not be the sole means of accepting or rejecting this material. The data listed here falls within the normal range of product properties but should not be used to establish specification limits nor used alone as the basis of design.

*For applications above Class 300, consult your representative.

California Proposition 65 Compliant
RoHS Reach Declaration Compliant
1/16” 1/8”
m 2.9 4.6
Y psi (MPa) 2,540 (17.5) 3,200 (22.1)
Gb psi (MPa) 343 (2.4) 866 (5.9)
a 0.325 0.273
Gs psi (MPa) 0.3 (0.002) 37 (0.255)