Durlon® 5300

Durlon® 5300 is a good quality commercial grade compressed non-asbestos sheet for moderate service conditions suitable for steam, oil, water, mild alkalis, mild acids, hydrocarbons and solvents. Durlon® 5300 has the ABS Product Design Assessment Certificate (14-HS1146798-PDA) for intended service in marine and offshore applications.

Industries

, , , , , , ,

Category:
A good quality commercial grade compressed non-asbestos sheet for moderate service conditions where an ABS Product Design Assessment (PDA) Certificate 14-HS1146798-PDA certified gasket material is required. It is suitable for a continuous operating temperature of 450°F (232°C); or a maximum pressure of 1000 psi (69 bar) at ambient temperature. DURLON® 5300 is suitable for steam, oil, water, mild alkalis, mild acids, hydrocarbons and solvents.
Durlon® 5300 contains high strength mineral fibers and fillers bonded with nitrile (NBR) synthetic rubber. A release agent on both sides provides good anti-stick properties.
Color: Rust

Fiber: Mineral

Binder: NBR

Temperature:
Min: -100°F (-73°C)
Max: 550°F (288°C)
Continuous, max: 450°F (232°C)

Pressure, max: 1000 psi (69 bar)

Density: 1.7 g/cm3 (106 lbs./ft3)

Compressibility, ASTM F36 :7-17%

Recovery ASTM F36 :40%

Creep Relaxation: 25%

Tensile Strength, ASTM F152: 1,500 psi (10.3 MPa)

Sealability (Nitrogen) ASTM F2378, cc/min: 0.1
Fluid Resistance - ASTM F146 IRM 903 oil, 5 hrs at 300°F (149°C)
Thickness Increase: 5%
Weight Increase: 15%
ASTM Fuel B 5 hrs at 70°F (21°C)
Thickness Increase: 5%
Weight Increase: 15%

Flexibility, ASTM F147: 10x

Gasket Factors:
THICKNESS: 1/16"
m: 1.5
Y psi (MPa): 1855 (12.8)
Gb psi (MPa): 474 (3.3)
a: 0.256
Gs psi (MPa): 48 (0.3)

THICKNESS: 1/8"
m: 2.5
Y psi (MPa): 2619 (18.1)
Gb psi (MPa): 902 (6.2)
a: 0.253
Gs psi (MPa): 4 (0.03)
Navy Adhesion Test, ABS-PDA, RoHS Reach Declaration