Durlon® 5000
Durlon® 5000 is a Commercial grade gasket material for moderate service conditions. It contains high strength mineral fibers and fillers bonded with NBR.
| Industries | Chemical Processing, Food & Beverage, General Industry, Marine, Mining, OEM Services, Oil & Gas, Water & Waste Water |
|---|
Durlon® 5000 is a commercial grade compressed sheet gasket material for moderate service conditions. It is suitable for a continuous operating temperature of 450°F (232°C); or a maximum pressure of 1000 psi (69 bar) at ambient temperature. It is suitable for steam, oil, water, mild alkalis and acids, hydrocarbons and solvents.
Durlon® 5000 contains high strength mineral fibers and fillers bonded with nitrile (NBR) synthetic rubber. A release agent on both sides provides good anti-stick properties.
Color: Light Green
Density: 1.7 g/cm3 (100 lbs./ft3)
Tensile Strength, ASTM F152: 1500 psi (10.3 MPa)
Compressibility, ASTM F36: 7- 17%
Recovery ASTM F36: 40%
Temperature:
Continuous, max: 450°F (232°C)
Pressure, max: 1000 psig (69 bar)
Fluid Resistance - ASTM F146 IRM 903 oil, 5 h/300°F (149°C):
Thickness Increase: 0-15%
Weight Increase: 10%
ASTM Fuel B 5 h/70°F (21°C):
Thickness Increase: 0-10%
Weight Increase: 10%
Sealability, ASTM F37 (Nitrogen): 0.5 mL/hr
Flexibility, ASTM F147: 10x
Gasket Factors:
THICKNESS: 1/16"
m: 1.5
Y psi (MPa): 1855 (12.8)
Gasket Constants
Gb psi (MPa): 474 (3.3)
a: 0.256
Gs psi (MPa): 48 (0.3)
THICKNESS:1/8"
m: 2.5
Y psi (MPa): 2619 (18.1)
Gasket Constants
Gb psi (MPa): 902 (6.2)
a: 0.253
Gs psi (MPa): 4 (0.03)
Density: 1.7 g/cm3 (100 lbs./ft3)
Tensile Strength, ASTM F152: 1500 psi (10.3 MPa)
Compressibility, ASTM F36: 7- 17%
Recovery ASTM F36: 40%
Temperature:
Continuous, max: 450°F (232°C)
Pressure, max: 1000 psig (69 bar)
Fluid Resistance - ASTM F146 IRM 903 oil, 5 h/300°F (149°C):
Thickness Increase: 0-15%
Weight Increase: 10%
ASTM Fuel B 5 h/70°F (21°C):
Thickness Increase: 0-10%
Weight Increase: 10%
Sealability, ASTM F37 (Nitrogen): 0.5 mL/hr
Flexibility, ASTM F147: 10x
Gasket Factors:
THICKNESS: 1/16"
m: 1.5
Y psi (MPa): 1855 (12.8)
Gasket Constants
Gb psi (MPa): 474 (3.3)
a: 0.256
Gs psi (MPa): 48 (0.3)
THICKNESS:1/8"
m: 2.5
Y psi (MPa): 2619 (18.1)
Gasket Constants
Gb psi (MPa): 902 (6.2)
a: 0.253
Gs psi (MPa): 4 (0.03)
Navy Adhesion Test, RoHS Reach Declaration
